produk
SUS304/ Teflon Coating End Cap
| Artikel No. | ID (mm) | OD (mm) | Tipe Reinforcement | BC | Ketebalan (mm) |
| EC-0100 | 103 | 153 |
| 133 | 3.0 |
| EC-0150 | 153 | 203 |
| 183 | 3.0 |
| EC-0200 | 203 | 257 |
| 233 | 3.0 |
| EC-0250 | 253 | 307 |
| 283 | 3.0 |
| EC-0300 | 303 | 367 |
| 340 | 3.0 |
| EC-0350 | 353 | 417 |
| 388 | 3.0 |
| EC-0400 | 403 | 467 |
| 438 | 3.0 |
| EC-0450 | 453 | 517 |
| 490 | 3.0 |
| EC-0500 | 503 | 583 |
| 544 | 3.0 |
| EC-0550 | 553 | 633 |
| 594 | 3.0 |
| EC-0600 | 603 | 683 |
| 644 | 3.0 |
| EC-0650 | 653 | 733 |
| 694 | 3.0 |
| EC-0700 | 703 | 783 |
| 744 | 3.0 |
| EC-0750 | 753 | 833 | NO | 794 | 3.0 |
| EC-0800 | 803 | 883 | or | 844 | 3.0 |
| EC-0850 | 853 | 933 | nyabrang | 894 | 3.0 |
| EC-0900 | 903 | 983 | Salib Tie Bar | 944 | 3.0 |
| EC-0950 | 953 | 1033 | Double cross + flange | 994 | 3.0 |
| EC-1000 | 1003 | 1083 |
| 1044 | 3.0 |
| EC-1100 | 1103 | 1183 |
| 1144 | 3.0 |
| EC-1200 | 1203 | 1283 | AXT ing | 1244 | 3.0 |
|
|
|
| 2 XC ross Tie Bar |
|
|
| EC-1300 | 1303 | 1383 |
| 1344 | 3.0 |
| EC-1400 | 1403 | 1483 | or | 1444 | 3.0 |
| EC-1500 | 1503 | 1583 | Double cross + flange | 1544 | 3.0 |
| EC-1600 | 1604 | 1704 | Trellis | 1644 | 3.0 |
| EC-1700 | 1704 | 1804 | 2X2 Cross Tie Bar | 1744 | 3.0 |
| EC-1800 | 1804 | 1904 |
| 1844 | 3.0 |
| EC-1900 | 1904 | 2004 |
| 1944 | 3.0 |
| EC-2000 | 2005 | 2105 |
| 2044 | 3.0 |
Cathetan:
Diameter saluran liwat 2000mm kasedhiya ing panyuwunan.
Kekandelan saluran dibangun ing SMACNA "standar konstruksi saluran industri babak ** kelas 1 lan 5 ing meksa -2500Pa (-10 in.wg) .Lan uga bisa diganti minangka request customer.
1. Bagean saluran udara sing bakal dicet (kalebu permukaan flange ing pipa) kudu sandblasted, roughness sandblasting kudu ketemu roughness saka 3.0 G / S76, 40μm utawa luwih, lan partikel wedhi ampas lan bledug logam njaba. pipa kudu dibusak sawise sandblasting.Konfirmasi manawa lumahing workpiece saluran resik lan workpiece ditutupi karo aluminium foil.
2. Narik fittings pipe menyang kamar nutupi, miwiti lukisan, semprotan karo mesin wêdakakêna elektrostatik lan tabung gun semprotan lengkap, nyetel wektu sintering Moderately miturut karakteristik bahan mentahan kanggo 15 ~ 20 menit, lan sawetara suhu sintering punika 285°~300°C.
3. Sawise workpiece rampung, njaba tabung ditempelake label sertifikasi FM, nomer serial QC lan label spesifikasi produk.Cangkeme flange disegel nganggo piring PE utawa papan corrugated PP kothong, lan tetep nganggo tape selang plastik.
4.Diameter saluran liwat 2000mm kasedhiya ing panyuwunan.Kekandelan saluran dibangun ing SMACNA.Lan uga bisa diganti minangka panjalukan pelanggan.
